Image from Peterson Manufacturing
Peterson Guest Blog Head

Guest Blog: Can brake-activated pulsating rear brake lights really reduce rear-end collisions?

Dec. 10, 2020
FMCSA granted a limited five-year exemption to FMCSA’s 49 CFR 393.25 to allow NTTC motor carriers to install red or amber brake-activated pulsating lights in addition to the steady-burning brake lights.

Can brake-activated pulsating rear brake lights really reduce rear-end collisions? It’s a question that may eventually have a definitive answer thanks to Federal Motor Carrier Safety Administration (FMCSA) granting a limited five-year exemption to FMCSA’s 49 CFR 393.25 to allow National Tank Truck Carriers (NTTC) motor carriers to install red or amber brake-activated pulsating lights in addition to the steady-burning brake lights.

FMCSA had found that rear-end collisions are often the result of a failure to respond to slowing or stopped vehicle and account for approximately 30 percent of all crashes. The most likely suspect is distracted driving. Additionally, FMCSA found that data between 2010 and 2016 revealed that large trucks are three-times more likely to be involved in rear-end accidents resulting in fatalities.

The Truckload Carriers Association (TCA) also recognized that tank carriers have a high stake in ensuring trailers against rear end collisions since they are often hauling hazardous or flammable materials, putting them at an even higher risk for serious or fatal injuries in rear end crashes.

FMCSA, TCA, and National Tank Truck Carriers (NTTC) have all come to the conclusion that distracted driving is not only widespread, but on the rise, and tank truck carriers must take further steps to protect themselves.

Groendyke Transport recognized the risk and installed a brake-activated pulsating amber light in addition to the steady-burning brake lights from January 2015 to July 2017. The result was an immediate decrease of 33.7 percent in rear-end accidents. Pulsating lights, like Peterson Manufacturing’s amber and red LED brake-activated strobes for tanker trailers, provide a series of flashes when the tanker is braking to alert potentially distracted drivers to the slowing or stopping tanker in front of them.

Peterson Manufacturing is proud to announce the immediate availability of its LED Auxiliary Brake-Strobe Light and Harness System, specifically designed to meet the specifications of the FMCSA’s 49 CFR 393.25 five-year exemption. Tank fleets can now install the same Peterson harness components and Peterson LumenX LED 10-diode strobe light that made industry headlines and drove the FMCSA exemption.

FMCSA’s 49 CFR 393.25 states all exterior lamps on a vehicle are required to be steady-burning, except turn signal and hazard warning signal lamps, school bus warning lamps, tow truck amber warning or flashing warning lamps, commercial motor vehicles transporting oversized loads, and warning lamps on emergency and service vehicles.

Sponsored Recommendations

Report: The 2024 State of Heavy-Duty Repair

From capitalizing on the latest revenue trends to implementing strategic financial planning—this report serves as a roadmap for navigating the challenges and opportunities of ...

Fleet Industry Benchmarks: How does your fleet stack up?

Discover how your fleet compares to industry benchmarks and gain insights from a 2024 Benchmarking Report on maintenance spend, turnaround time, and more. Join us to identify ...

Reducing CSA Violations & Increasing Safety With Advanced Trailer Telematics

Keep the roads safer with advanced trailer telematics. In this whitepaper, see how you can gain insights that lead to increased safety and reduced roadside incidents—keeping drivers...

80% Fewer Towable Accidents - 10 Key Strategies

After installing grille guards on all of their Class 8 trucks, a major Midwest fleet reported they had reduced their number of towable accidents by 80% post installation – including...