Modell No. PL6850 12/24V 120A Flashing Power Supply and HD Battery Charger • 12/24 Volt Operation • 0-120A Power Supply, on demand (12V) • 0-60A Power Supply, on demand (24V) • Minimal voltage ripple (less than100mV) • Rapid Load Response (RLR) Technology • 120/60/40/10A 12V Battery Charger • 60/40/10A 24V Battery Charger • Charges Flooded, AGM, Spiral Wound, Deep Cycle lead acid batteries • Charge LiFePO4 (LFP) Lithium batteries • Temperature compensation • Smart Clamp Technology The PRO-LOGIX PL6850 is designed to provide stable power, on demand up to 120 amps, to a vehicle electrical system to support module reprogramming, ADAS recalibrations, on-vehicle repairs and electrical system diagnosis. It features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments, allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. It features rapid load responsiveness for ultra-quick recovery from system demand increases. It also delivers its massive power with minimal voltage ripple (less than100mV), providing a clean flow of power to the vehicle without risk of programming interference. This creates an optimal electrical environment for the above listed tasks. It is also designed specifically for fleet service battery charging with a maximum charge rate of 120 amps, to quickly and effectively bring 4- and 8-battery Group 31 packs back to full charge. It features the ability to properly charge a wide variety of lead acid battery types, including Conventional, AGM, Spiral Wound, Start-Stop, Deep Cycle and Marine lead acid batteries, plus LiFEPO4 Lithium Batteries – enabling beneficial service of virtually any battery type installed in a vehicle. The PL6850 adapts its charging approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation when charging in extreme temperatures. In this video, our friend and colleague Tanner Brandt, Mobile Diagnostic Technician and Owner of Autodiag Clinic, LLC, takes a deep dive into shop best practices for efficiency and hassle-free servicing of vehicle systems and module reprogramming. He specifically addresses how the PL6850 can be used to avoid damaging specific vehicle modules. About Clore Automotive Founded in 2001, but with an over 50 year heritage, Clore Automotive is a leader in the design, development and manufacture of automotive service equipment for professionals and consumers. Our brands include some of the most widely recognized names in the automotive equipment aftermarket, including Booster PAC, Jump-N-Carry, PRO-LOGIX, CHARGE IT! and Light-N-Carry. Visit our website: https://cloreautomotive.com/ Follow us: https://www.facebook.com/CloreAutomotive/ https://x.com/cloreautomotive https://www.linkedin.com/company/cloreautomotive/ https://www.instagram.com/cloreautomotive/ #cloreautomotive #PROLOGIX #PL6850 #HDcharging #fleetcharging #charger #batterycharger #modulereprogramming #ADASrecalibration #cleanpower #flashingpowersupply #steeringangle #alignment