Steck Manufacturing manufactures body shop specialty repair tools and specialty tools and The BigEasy Lockout tool kit which unlock cars without damaging the car door. Visit our website at www.steckmfg.com to view our product offerings or call 1-800-227-8325 for a catalog.
The Steck Manufacturing Pro Folding Parts Cart, No. 35950, is a versatile parts cart with locking pin fasteners that allow each shop to custom configure up to three shelves/mesh...
The Steck Manufacturing Extended Clip Release Tool, No. 21710, is designed to access door panel clips that are not easy to access, saving technicians time and the possibility ...
The Steck Manufacturing Retainer Clip Release Tool, No. 21715, is designed to allow the user to release clips from the outside. This tool slides between the molding and panel,...
The Steck Manufacturing Antenna Wrench II, No. 21650, works in conjunction with or independently with the company's original Antenna Wrench (No. 21600). The Antenna Wrench II ...
The Steck Manufacturing Soft Strike General Purpose Dolly Cover, No. 35013, is made from Buna rubber for a steel dolly to allow users to transition from working body tools on ...
The Steck Skin Zipper2 door skinning tool helps technicians hem steel door window flange openings. The Skin Zipper2 skins the window opening with its self-lubricating, reinforced...
The Steck Manufacturing Al Skin Zipper works on any 1mm aluminum skin and 1.5mm door shell. The air-hammer-driven tool skins doors in approximately 15 minutes using a self-lubricating...
The Steck Manufacturing SPR Extraction and Insertion Tools, Nos. 21970 and 21960, allow technicians to repair, remove and install self-piercing rivets without the need of hydraulic...
The Soft Strike 4-pc aluminum conversion kit allows techs to convert body shop tools for use with aluminum repairs, without steel cross contamination and galvanic corrosion.
The Steck SPR Insert and Extraction tool, the Al Skin Zipper, Al Skin Zipper 2 and Hard Cap Body Hammer Cover are used for working on the new Ford F-150 and aluminum door skins...
Among the tools included in the kit are the Soft Strike Rubber Dolly Body Covers, the Soft Strike Dinging Spoon Cover and the Soft Strike Hammer Cover.
The Steck Manufacturing Axle Popper II is the air tool version of Steck's original Axle Popper Wedge, No. 71411. The Axle Popper II is tapered on both ends of the wedge along ...
The Steck Manufacturing Soft Strike 4-pc Aluminum Conversion Kit, No. 35000, includes tools to work on aluminum body components. The Soft Strike Rubber Dolly Body Covers and the...
The Steck Super Easy Wedge, No. 32923, is a larger version of the Easy Wedge to be used as an accessory with Steck's BigEasy Lockout kits. The Super Easy Wedge inserts to ...
The Steck I-Bolt universal tow eye with safety strap, No. 71490, gives users the ability to safely load disabled foreign and some domestic vehicles on roll back wreckers and frame...
Steck Manufacturing's Flange Lever, No. 20037, quickly accesses hard-to-reach damaged frame flanges, door and hood edges and radiator supports to bring back to proper edge alignment...
The Steck Manufacturing Work Stand Wheeler is a wheeled platform accessory for existing work stands, allowing technicians to easily move loaded work stands from repair to paint...
Steck introduces the Air Tool Oiler Dispenser, No. 16600. This unique self centering, non-drip oil dispenser head design allows the technician to easily push the air tool inlet...
The Mig Torch Holder, from Steck Manufacturing, attaches directly to the car so the torch head can be held close to the welding activity, eliminating the need to continually lay...
Steck Manufacturing's Axle Popper, No. 71410, breaks loose half shafts from transaxles on front-wheel-drive cars. Safer than using a pry bar, the Axle Popper’s wedge forked end...
Steck Manufacturing Company's Disc Smasher will ensure quality grinding discs are available and maximize the shops investment in material costs for these discs by reducing excessive...
Steck's Disc Smasher, No. 35270, has a nylon base with an 8”-long metal center post and can hold up to 25 5”, 7” or 10” grinding discs. One squeeze of the release lever while ...
Steck Manufacturing Co.'s Hatch Jammer XL, No. 17200, allows body shop technicians to hold lift gate or hatch in a partially open position for sanding, painting, buffing, etc....
Steck Manufacturing Co.'s Handy Pull Kit, no. 20222, assists with light-duty pulling of tapped holes in automotive body structures, as well as proper hood and trunk alignment....
Steck Manufacturing's Stud Lever, No. 20014, allows techs to quickly grip studs (pull pins) and help control the dent pulling process, as well as accuracy of the pull. The Stud...
The BigEasy Night Light, No. 32933, from Steck Mfg. illuminates the inside of a vehicle at night to allow users to locate the vehicle interior door lock or keys while using the...
The Steck Mfg. Super SeamBuster, No. 20017, is designed to attach to any air hammer for faster and more efficient separating of quarter panels, rockers, bonded door skins and ...
The Steck Mfg. BigEasy Lock Out Kit, No. 32900, offers security access to unlock cars for emergencies in seconds, without damaging cars. To use, insert the Easy Wedge into the...
The Steck Mfg. Panel Shaper Kit, No. 20046, allows techs to reshape badly deformed inner panels, body lines and floors to their original shape. Each kit contains three unique ...
The BigEasy Loop, No. 32903, from Steck Manufacturing snaps on to any of the BigEasy Lockout Tools to provide easy leverage to pull door handles and window cranks during the door...
Steck Manufacturing's Work Stand Clamp for Doors, No. 35753, secures a car door to a work stand in seconds by clamping onto the inside frame of the door at the window opening....
Steck Manufacturing offers the MIG Light, No. 23240, an LED attachment for a MIG Torch which easily adjusts for accurate illumination of the area to be welded. The MIG light works...
The Hatch Jammer, No. 17100, from Steck Manufacturing allows techs to hold a lift gate or hatch in a partially open position for sanding, painting or buffing. The tool will stabilize...
Steck Manufacturing Company has released another winning tool: The Hatch Jammer, which allows body shop technicians to hold lift gate or hatch in a partially open position for...
Steck's Skin Zipper allows techs to attach a new door skin in less than 10 minutes with minimal arm fatigue. The tool skins doors quickly using a self lubricating reinforced nylon...
EZ Pull pliers won't cut pull pins or flanges Steck Manufacturing's EZ Pull Pliers, No. 20085, allow techs quick access to grip and pull multiple pull pins (studs) as well as ...
Right Angle SeamBuster has greater reach Steck Manufacturing Co. introduces the Right Angle SeamBuster, No. P/N 20016. Adding a 90° angle along with a third sharpened edge to ...
XTension eases front and back-end paint jobs Steck Manufacturing Co. has released the Xtension Arm Kit. Xtension allows body shop technicians to utilize existing shop X-Work stands...
Steck Manufacturing Co.'s new Tie Rod Pliers No. 71465 allows tow-truck drivers and technicians the ability to temporarily steer, load and secure a vehicle with an outer tie-rod...
Tie Rod Coupler saves time and trouble Steck Manufacturing Co. has released their new Tie Rod Coupler No. 71470, which allows tow-truck drivers and lot drivers the ability to ...
Now available from Steck is the EZ Scraper Tool for both body shop technicians and automotive repair technicians. This handy tool allows you to strip old paint, windshield sealers...
Steck Manufacturing Company offers the Easy Pry Tool, which the company claims saves technicians up to 15 minutes of labor by easily removing and installing weather stripping ...
Steck Manufacturing has released the EZ Scraper Tool, which allows body shop technicians to remove old paint, seam sealers, and adhesives from body panels and undercoating. The...
