The Snap-on Heavy Duty Tilt Back Tire Changer, No. EEWH331A, tilts back to help speed setup. This tire changer offers pneumatic bead assist mounts for low profile truck tires....
The Snap-on 1/2 Ton Telescopic Hydraulic (TJ100) Transmission Jack features saddles with multi-position, adjustable ratcheting arms to fit any configuration of FWD, RWD, and four...
The Snap-on Synergic Double-Pulse Inverter MIG Welder, No. MIG200i, offers a welding current up to 200A, and pulse and double-pulse settings help provide increased control with...
The Snap-on Touch Screen Video Motorized Wheel Balancer, No. EEWB334A, facilitates fast data entry on a shop-grade, navigation-friendly, touch screen monitor, the company says...
The John Bean Tilt-Arm Tire Changer, No. T5745T, handles a wide range of high-performance wheel and tire assemblies, including low-profile and run-flat tires. It features the ...
The John Bean V2100 Wheel Alignment System provides fast and accurate real-time measurements, according to the company. One of its offerings is the VIN scanner that allows users...
The Hofmann Geodyna 8200 Wheel Balanceris designed for shops that service cars and light trucks. The 8200 offers fully automatic data entry via scanner and the patented smartSonar...
The Snap-on Swing Arm Tire Changer, No. EEWH329A, is an ideal mid-range tire changer for servicing all OEM assemblies for light trucks, cars and SUVs. It’s ideal for shops that...
The Hofmann geodyna 9000P Wheel Balancer features a touch screen and non-contact 3D imaging technology for expert balancing. Non-contact 3D imaging technology on the Hofmann 9000P...
The Hofmann 14K Scissor Alignment Lift - Surface Mount, No. BLA14178, is open between the runways from front to rear, allowing access to the complete undercar. This 14,000-lb ...
The John Bean Wheel Balancing System, No. B800P, from Snap-on Equipment, is fully automatic and offers a touchscreen graphical interface. The wheel scanner detects rim diameter...
A video wheel balancer for cars and light trucks, the Hofmann geodyna 8250P, from Snap-on Equipment, features fully automatic data entry via scanner and smartSonar, the pinpoint...
The John Bean T7100S Tire Changing System, No. T7100S, from Snap-on Equipment, is a center post tire changer designed for easy use with minimal training of technicians. The PROspeed...
The John Bean Wheel Balancer, No. B2000P, from Snap-on Equipment, is the only automated diagnostic wheel balancing system that offers touchless measurement and analysis, according...
The redesigned John Bean Wheel Alignment System, No. V2400, from Snap-on Equipment, features improved camera and target technology, and the smallest and lightest XD target system...
The Snap-on Motorized Wheel Balancer, No. EEWB332A, utilizes time-saving sonar-sensing technology to measure rim width without the need to manually measure and input values. Multiple...
The Snap-on Motorized Wheel Balancer with Raised Display, No. EEWB332A, comes equipped with a sonar sensor that eliminates the manual measurement of the rim width, allowing for...
The John Bean V2300 Imaging Wheel Alignment System, from Snap-on Equipment, is powered by the latest camera and target technology and includes user-friendly features to help provide...
The John Bean alignment machine with Prism Pro 42 software with advanced interface allows the technician to complete a fast and efficient, rolling compensation without jacking...
The John Bean V3400 Wheel Alignment System, from Snap-on Equipment, provides precise alignment readings in less than two minutes for increased productivity and less waiting for...
The Snap-on Dual 80 Technology Ratchet has 25 percent less ratcheting arc than and requires the least amount of arc to engage the next gear tooth. A sealed head keeps out dirt...
The Snap-on 3/8" ratchet No. FHBF80 is designed for locations where extra clearance is needed. It has 80 tooth gear, seven teeth in contact with gear to provide strength and durability...
The Snap-on 3/8" Drive Air Ratchet (FAR7000) is a high-speed, low-torque air ratchet will make fast work of any service or repair job. The tool is ideal for working on a variety...
Designed to reduce floor-to-floor time, the Snap-on Two-Speed Tilt Back Tire Changer, No. EEWH326A, has a two-speed turntable with a forward speed of both 14 rpm for increased...
The John Bean ATC 900 Dual Bead Breaking Tire Changer from Snap-on has a dual-disc bead breaker, center clamp system and automatic demounting tool. With its leverless design, ...
Snap-on's 400 NM True UV Rechargeable Flashlight, No. ECFUVLEDA, helps locate leak detection dye on a vehicle. It has a 400 NM wavelength to locate A/C, oil and coolant dye...
Snap-on's Metered UV Dye Injector Gun with Hose Coupler and 12 Ounce Dye Cartridge, No. ACTUVPROKT, allows the user to add leak detection dye to an A/C system without the ...
The John Bean Scissor Alignment Lift from Snap-on Equipment is a rugged 12,000-lb capacity scissor alignment lift with an open front design that provides easy access to alignment...
The John Bean Alignment Audit System, from Snap-on Equipment, allows service technicians or advisors to conduct fast and easy wheel alignment audits with complete color-coded ...
Snap-on's John Bean AC400 Touchless Alignment Wheel Clamp from John Bean provides secure clamping without touching the rim. Employs clutch limited-clamping force ensuring secure...
The John Bean Integrity Test Drive Engine Analyzer from Snap-on Equipment performs a complete vehicle inspection, providing customers with a 'health' snapshot of their vehicle...
Snap-on introduces the John Bean RFV 2000 Automated Diagnostic Wheel Balancer. The John Bean RFV 2000 incorporates “stripe-of-light” technology that provides advanced measuring...
Snap-on’s Aqueous Parts Washer, No. PBC33A, restores parts to like-new condition with less effort, while being more environmentally responsible. The heated cleaning solution works...
Snap-on’s QD series click type torque instruments, Nos. QD2R100 and QD3R250, feature a certificate of calibration, with actual certification readings and instrument serial numbers...
The Snap-on Prism Portable Imaging Aligner can be calibrated to multiple racks in the shop and can be moved from rack to rack without having to re-calibrate. The Bluetooth wireless...
Snap-on introduces their new Cordless Handspin Wheel Balancer (EEWB314A) that is powered by the same Snap-on 12, 14.4 or 18 volt Versa Volt® battery packs and the 125 lb. unit...
