• Shawn Mahoney

    Drivetrain Product Manager, Betts Truck Parts & Service
    Getfile 582e16deb0c03
    Shawn Mahoney
    Nov. 17, 2016
    Q: Can I use a manual adjust clutch with a hydraulic linkage?A: You can, but it is not recommended. If you do, understand that proper clutch adjustment monitoring is critical....
    Getfile 582e14278e72b
    Shawn Mahoney
    Nov. 17, 2016
    For a hydraulic clutch linkage, a self-adjusting clutch is the better option.
    Getfile 582e1231479f2
    Shawn Mahoney
    Nov. 17, 2016
    It varies by manufacturer, but traditionally, every 25,000 miles the clutch was inspected and the clutch release bearing was greased.
    Getfile 582e105b9f8af
    Shawn Mahoney
    Nov. 17, 2016
    The proper distance of the clutch release bearing and the clutch break, regardless of the manufacturer, is a minimum of 1/2".
    Getfile 582e0c49dcc9e
    Shawn Mahoney
    Nov. 17, 2016
    The limited feedback of hydraulic clutch release linkages and the need for education contribute to improper clutch adjustment.
    Getfile 582e08cfb04ce
    Shawn Mahoney
    Nov. 17, 2016
    Incorrect maintenance procedures are causing frequent premature failures of 15.5" clutches.