Photo courtesy of BendPak

BendPak expands XPR Series of two-post lifts

Oct. 28, 2020
The latest XPR Series lifts increase clearance and are designed to improve lifting point access.

BendPak added three new models to its XPR family of two-post lifts. The extra-tall XPR-10XLS symmetrical and XPR-10AXLS asymmetrical lifts provide more under-lift clearance to help reduce neck and back pain in taller technicians, while the XPR-12C-LTA’s three-stage telescoping arms help reach challenging lifting points on trucks and other vehicles with long wheelbases.

“Because no two jobs – or technicians – are alike, our XPR Series of two-post lifts offers a range of configurations to help customers choose what works best for their specific shops instead of relying on ‘one size kind of fits all,’” says Jordan Garcia, strategic account representative, BendPak. “Tall technicians will appreciate being able to work at full height with an XPR-10XLS or XPR-10AXLS instead of bending under a lift for hours at a time. And techs who’ve struggled to balance a truck on a lift with short arms will waste less time spotting with the new XPR-12C-LTA.”


The BendPak XPR-10AXLS and XPR-10XLS are designed with an extended working height that’s ideal for taller technicians. These two-post lifts feature a massive cylinder stroke that raises vehicles 75” to 80” – at least 6” higher than standard BendPak two-post lifts go

Each lift has a 10,000-lb lifting capacity and features an oversized 59” tall carriage for strength. The lifts are designed with a single-point safety release and safety locks spaced every 3” in each column.

The XPR-10AXLS is an asymmetrical lift with triple-telescoping front arms and two-stage rear arms that offer greater arm sweep so they can reach more pick-up points especially those that can be hard-to-reach on vehicles with unibody construction, wide bodies, or narrow configurations.

The symmetrical XPR-10XLS is designed to provide clear space for opening doors on cars but can also be used to service trucks and SUVs with an optional extension kit or available Low-Pro arms. When BendPak’s exclusive Low-Pro arms extend, the top of the arm is closer to ground level than other arm designs, helping them slide under vehicles with low ground clearance.


The BendPak XPR-12CL-LTA 12,000-lb capacity truck lift features three-stage telescoping front and rear arms with a 72” maximum reach that’s almost 25 percent greater than those on BendPak’s standard XPR-12CL two-post lifts. These super-sized arms are designed to reach OEM lifting points and maintain a vehicle’s center of balance on even the most challenging wheelbases. To ensure long service life, the lift’s carriage has been strengthened to support the longer arms, oversized cable sheaves reduce cable fatigue, and the baseplates are oversized A36 steel.

All XPR Series lifts have a single-point lock release and safety locks every 3” in each column. They are clear-floor lifts to make it easy to roll tools and equipment under the vehicle being serviced, with the equalization beam and a padded safety shutoff bar overhead. The XPR-10AXLS, XPR-10SLS, and XPR-12CL-LTA have been third-party tested and are ALI-certified to meet industry safety and performance standards.