The Hazet 1/4" HiPer Fine Tooth Reversible Bit Ratchet, No. 863HPB, offers a 4-degree operating angle to enable use in tight spaces including engines, machine construction, and...
The Hazet 3/8" HiPer Fine Tooth Reversible Ratchet, No. 8816HP, features an operating angle of 4 degrees to enable use in constricted spaces such as in engines, machine construction...
The Hazet Fine Tooth 1/2" Ratchet, No. 916HP, offers 737 ft-lbs of torque for strength and endurance. It has a length of 11" and 90 teeth to allow a 4 degree handle swing when...
The Hazet Extra Long Air Ratchet, No. 9022P-XLG, delivers a maximum torque of 69.92 ft-lbs and enables manual tightening with torque up to 295.02 ft-lbs. The tool is 21.6" long...
The Hazet HiPer Fine-Tooth 1/2" Reversible Ratchet, No. 916HPL, features a length of 16" and has a maximum torque of 737.56 ft-lbs. It has a small operating angle of four degrees...
The Hazet HiPer Fine-Tooth Reversible Ratchet, No. 863HP, features a small operating angle of four degrees, enabling use in tight spaces. The 863HP is easy to clean and corrosion...
The Hazet 3/8" Pneumatic Impact Ratchet, No. 9021SR-1, is equipped with a non-rebound striking mechanism for low-impact work. The reaction-free behavior of the high performance...
The Hazet 1/2" Impact Wrench Socket Set, No. 903 SLg6/5, comes with an additional outside hexagon adapter (No. 1003 S-1) and power screwdriver sockets with driver widths of 17mm...
The Hazet Mobile Work Bench, No. 179 NW-7, is designed to store tools neatly and keep them portable. The bench combines central locking and a cylinder lock to secure both the ...
The Hazet 9014 P-1 1" Impact Wrench offers a direct hammer striking mechanism for less vibration and high output at the same time. This wrench has a maximum loosening torque of...
The Hazet Extra Short 1/2" 9012 M-1 Impact Wrench is equipped with a single hammer striking mechanism and has a maximum loosening torque of 885 ft-lbs (1,200 Nm). The recommended...
The Hazet 1/2" 9012 A-1 Angled Impact Wrench is designed for working on brake caliper screw connections and other hard-to-reach screw joints. This tool has a maximum loosening...
The Hazet Universal Injector Extraction Tool Set, No. 4798-6/8, enables the removal of the injectors without having to remove the electrical plug connection or the injector head...
The Hazet High Performance Air Ratchet, No. 9022-360, is designed to offer high loading capacity with reduced operating noise. This ratchet features “Quiet Mode,” which allows...
The Hazet Compressed Air Quick Connector Loosening Tool, No. 4969-612, is designed for loosening plug connectors on commercial vehicles that may be difficult to loosen using traditional...
The 1 to 10 Nm Torque Wrench from Hazet offers a small, slim design for industrial applications. This tool is 125mm long and designed to be used universally because it features...
The Hazet Multi Sander, No. 9033N-6, is designed for removing underbody protection, sealing compounds, rust, corrosion, deposits, varnishes, films, labels and paint. This sander...
The Hazet Mini Die Grinder, No. 9032M-36, is designed for precise work with grinding pads even in tight spaces. The grinder has a 6mm collet chuck and an adaptor to fit 3mm grinding...
The Hazet Belt Sander, No. 9033N-4, offers a 10mm belt width for narrow surfaces. Users can regulate the rotational speed using a rotary controller on the back of the handle. ...
The Hazet Die Grinder, No. 9032LG-1, features a four-jaw chuck and 6mm collet and is designed for grinding, buffing, polishing and deburring. Its straight, long style is designed...
The Hazet Vibration-Damped Metal Sheers, No. 9035N-5, is designed for contour cutting. This pneumatic tool cuts stainless steel up to 1.2mm and aluminum up to 1.6mm. The tool ...
The Hazet Nibbler, No. 9036N-1, is designed to cut with small radii. This pneumatic tool cuts stainless steel up to 1.2mm and aluminum up to 1.6mm. The tool features speed regulation...
The Hazet Multi-Table 167T Adjustable Table is height adjustable in 15 stages between 950 and 1,300 mm, allowing users to adjust it to the desired working height. The table surface...
The Hazet Dismantling Tool removes connectors quickly and easily. To use, insert the removable connector into the dismantling tool tighten using a 13mm hexagonal socket wrench...
