The CTA Manufacturing Ford Crankshaft Rear Seal Installer - PowerStroke, No. 8229, is designed to install the crankshaft rear oil seal and wear sleeve. The tool services 2003-...
The CTA Glow Plug Thread Repair Kit, No. 7730, is designed to repair glow plug threads for a wide range of diesel engines. It professionally and permanently replaces the threads...
The CTA Vacuum Cooling System Filler, No. 6520, is designed to purge trapped air from the cooling system and test for coolant system leaks. In addition, it refills the cooling...
The CTA Extended Lug Socket Set - 17mm, 19mm, and 21mm, No. 7069, are designed with a protective outer sleeve to ensure there is no damage done to the inner wall lug cavity of...
The CTA 10mm Socket Set, No. 3805, features five popular style 10mm sockets in 1/4" and 3/8" drives. The included designs are stubby, standard, deep, flex, and magnetic impact...
The CTA 8-pc Wheel Hanger Set, No. 7076, is designed to service most European vehicles. The set is used to safely and easily hang wheels during removal and installation on the...
The CTA 2-pc Wheel Hanger Set - M12 x P1.25, No. 8871, is designed to thread into the wheel hub on vehicles that use lug bolts instead of wheel studs for easier alignment and ...
The CTA Lower Control Arm Pulling Tool, No. 3802, is designed to make removing lower ball joints easier. It works by hooking over the lower control arm, then using a pry bar to...
The CTA Porsche Cam Alignment Tool Kit for 986 & 996, No. 5018, is designed to service the engine timing system on the 996 generation Porsche 911 up to 2001 and the 986 generation...
The CTA Porsche Vibration Damper Counter Holder for 970 & 92A, No. 3804, is used to counter hold the crankshaft pulley during removal and installation. The 3-1/2’ long tool is...
The CTA Porsche Timing Tool Kit for 987, 981, 997, and 991, No. 3803, is used for holding the camshafts in the timing position during gearwheel installation and when turning the...
The CTA Manufacturing 15L Fluid Extractor System, No. 6510, is hand or air-operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included...
The CTA Manufacturing E-Z Chamfer Tool, No. 3838, is designed for quick and clean deburring. The key feature is a 5-point cutting design to efficiently remove burrs and ridges...
The CTA 8-pc Oil Drain Plug Kit, No. 1320, is designed to remove plastic drain plugs found on many late-model vehicles, including oil drain plugs and radiator drain plugs. The...
The CTA Mini Flip Socket Set, No. 4223, features four mini 12-point flip sockets which are paired with its most common size companion to reduce work time. The set is ideal for...
The CTA 22mm Injection Wrench, No. 5069, is designed for Cummins ISX applications as well as Freightliners, highway utility, and marine applications. Applications include common...
The CTA Ford/Mazda Timing Tool Kit, No. 5063, is a comprehensive tool kit to service Ford, Lincoln, Mazda, Volvo, Jaguar, and Land Rover. The kit is designed for 1.4L, 1.5L, 1...
The CTA Brake Caliper File, No. 5077, features an extra slim design to remove brake dust, rust, and dirt from the caliper. The files tip can be used for scraping crude residue...
The CTA Mack Truck King Pin Socket, No. 5044, is designed to fit the slotted adjusting screw on tapered kingpins found on most Mack front axles (12,000 lbs, 16,000 lbs, 18,000...
The CTA 4-pc Oil Filter Wrench with Stand features a stable, secure, and permanent stand that allows for easy grabbing. The set includes the following heavy duty swivel type oil...
The CTA 4-pc Flip Socket Set, No. 1190, features a range of "flip" sockets with an extension, offering two hex sizes with each socket for the removal of inflated, warped, and ...
The CTA HENN Clamp Pliers, No. 1013, are designed for the loosening or opening of HENN clamps found on coolant hoses, charge air hoses, and turbo hoses. The T-handle features ...
The CTA Turbo System Leakage Tester Kit, No. 7912, is ideal for vacuum leak detection. It locates air leaks in the components by plugging the output side of the turbo and plugging...
The CTA 5-point EPR Torx Plus Socket Sets are available in three drive sizes: 1/4", 3/8", and 1/2". Each set features the 5-point Torx Plus design (EPR) which is found on many...
The CTA 4-pc XZN "L" Wrench Set, No. 9025, is designed to service VW, Audi, Porsche, BMW, Volvo, Mercedes-Benz, Detroit Diesel engines, and more. The "L" shape construction allows...
CTA's 7-pc Low Profile Oil Filter Socket Set, No. 7995, are specially designed to service tight clearance applications. The low profile sizes are ideal for underhood car service...
The CTA 4-pc Ignition Coil Puller Kit, No. 7990, is designed to prevent coil damage caused by home-made removal methods and to prevent hand injury in tight quarters. The different...
The CTA VAG 1.8T and 2.0T Timing Tool Kit, No. 7910, is designed to lock the camshafts and crankshaft in position when servicing the timing chain and setting the timing. The kit...
The CTA 5-pc Spark Plug Socket Set, No. 5061, is a comprehensive kit that includes three extra long 10" magnetic sockets. The sizes include: 5/8” by 12pt (6" OAL), 5/8” by 6pt...
The CTA H.D. Chain Wrenches, Nos. 5052 and 5053, are designed with extra-long chains to handle most shapes such as round, square, hexagon, and octagon. The double-action head ...
The CTA 5-pc Oil Pan Drain Plug Kit, No. 5049, is designed to remove plastic drain plugs found on many late-model vehicles. The kit includes a T-handle with a square drive ball...
The CTA Cam Phaser and Timing Chain Locking/Holding Set, No. 5000, is designed to service 3.0L, 3.2L, and 3.6L Pentastar engines. The kit includes two camshaft phaser holders ...
The CTA 4-pc Spark Plug Socket Set, No. 2030, features two 14mm and 16mm swivel spark plug sockets in two different lengths to access hard-to-reach spark plugs. The spark plug...
The CTA Extra Deep Socket Set, No. 1030, provides access to recessed areas with extra long bolts, as found on some bumper, rear lamp, and door hinge fittings. The set of two sockets...
The CTA Ford Water Pump Pulley Tool, No. 8069, is designed to remove and install water pump pulley's on Ford, Lincoln, and Mercury 3.0L DOHC engines. It includes pulley removal...
The CTA 7-pc Plastic Pry Bar Set, No. 5170, is designed for prying, scraping, fastener removing, and more. Each pry bar is 7" long and has a hang hole. The plastic design prevents...
The CTA 5-pc Auto Body Remover Kit, No. 5150, is designed to remove all types of automotive plastic fasteners, molding, and parts. The kit items are light in weight, strong, and...
The CTA Extra-Long Trim Tool and Pry Bar, No. 5160, provides users with the ability to safely and easily pry and remove interior and exterior trim. The tool is 15-3/4" long for...
The CTA 26-pc Terminal Tool Kit, No. 9812, is designed using high quality steel with tips that will not bend or change position over time. The set includes an application chart...
The CTA 5-pc Flip Socket Set, No. 1463, offers two hex sizes with 1/2" square drive in center on each socket. The half metric sizes are useful for the removal of inflated, warped...
The CTA 19-pc Master Oil Funnel System Kit, No. 7900, is designed to cover most European, Asian, and domestic vehicles currently on the road today. An assortment of different ...
The CTA Mercedes Lug Bolt Socket, No. 4218, is designed to safety remove lug bolts when servicing Mercedes Benz vehicles. The socket's special 17mm x 6-point "flower" design makes...
The CTA BMW Fuel Injector Oil Seal Kit, No. 2250, is used for removing and installing the injector seals found on many BMW engines. This kit can be used on the most commonly replaced...
The CTA Injector Seal Extraction Kit, No. 7806, removes clogged or stuck diesel injector seals. The 2.2-lb slide hammer removes the more difficult seals by its design with an ...
The CTA Glow Plug Tip Puller Kit, No. 7802, removes broken glow plug tips stuck in the cylinder head of diesel passenger cars, light trucks, heavy trucks, and many construction...
The CTA Manufacturing Corp. Hose Clamp Pliers, No. 1048, feature a 30mm circle head with multi-directional diamond pattern for secure grip and a wide application range, including...
The CTA Manufacturing Corp. Ford Flow Sensor Socket, No. 7850, is a 19mm socket with inner hex walls that are machined extra-deep for clearance of the ford fuel/temperature flow...
The CTA Manufacturing Corp. Injector Puller Kit, No. 7808, removes frozen or stuck injectors without removing the electrical components. Use the injector puller to service many...
The CTA Manufacturing Corp. Glow Plug Puller Kit, No. 7804, removes glow plugs even when the compartment is not easily accessible. It is useful in narrow engine bays with glow...
The CTA Manufacturing Lug Driller Kit, No. 1775, removes locking lug bolts quickly, safely, and without damage to the wheel or rim. The kit is designed to work on European vehicles...
The CTA BMW Flywheel Holder, No. 2801, is used for securing the crankshaft with the transmission installed (connected to engine) on BMW N20 and N26 engines. While replacing the...
The CTA Ford Valve Spring Compressor, No. 2823, services Ford 4.0L SOHC V6 engines and some late model 4.6L V8's. The tool consists of three components with a detachable end to...
The CTA Injector Seat and Chamber Cleaning Set, No. 7810, cleans the injector seat and hole prior to installation of a new injector. Cleaning the seat and hole is a crucial step...
The CTA Manufacturing Corp. Brake Bleeder Bottle, No. 7786, comes with two brake bleeding bottles. Bottles feature a built-in magnet designed for secure placement. The bottles...
The CTA Manufacturing Corp. 12-pc. Deep Metric Socket Set, No. 1099, contains 120mm-long metric sockets, providing technicians access to recessed areas with long bolts, as found...
The CTA Manufacturing Corp. Ford Water Pump Pulley Tool, No. 8069, removes and installs the water pump pulley on Ford, Lincoln, and Mercury 3.0L DOHC engines. The tool includes...
The CTA Ford Camshaft Locking Kit, No. 7640U, is designed to service Ford 4.6L V8, 5.4L V8 and 6.8L V10 3V engines, which are found in the Mustang, Explorer, Expedition, Navigator...
The CTA 5-pc Fuel Line Flex Sockets, No. 1809, are designed to flex at 45 degrees to securely grip the direct fuel line. The sockets adjust to the proper angles around the direct...
The CTA BMW Crankshaft Front and Rear Seal Removal and Installer Kit, No. 7643, removes and installs front and rear crankshafts on chassis models N40, N42, N45T, N46T, N52, N52K...
The CTA 7-pc Stubby Phillips Screwdriver Bit Set, No. 9770, features a low profile design that allows access into tight areas. The set includes two Phillips #1 bits, three Philips...
The CTA 92-pc Diagnostic Line Kit, No. 7662, is a comprehensive electrical testing kit for cars, trucks, tractors, ATVs, motorcycles, boats and more. The kit is designed to provide...
The CTA Transmission Oil Drain and Flush Kit, No. 7650, is designed to drain and flush the transmission oil cleanly with the use of air pressure. According to the company, most...
The CTA Toyota Oil Filter Wrench, No. 1726, is designed to service all oil filter housing caps on 4, 6 and 8 cylinder Toyota, Lexus and Scion engines. The slim design helps users...
The CTA 5-pc Deep Metric Hex Socket Set, No. 1700, includes 8mm, 10mm, 11mm, 12mm, and 14mm sized sockets, all measuring 120mm long for extra-deep reach. Sockets in this set provide...
The CTA Tools VibroShock is designed to remove frozen or rusted screws, nuts, bolts or plugs without damage. VibroShock generates axial vibration with controlled torque to release...
The CTA Manufacturing DEF Filler Funnel Kit, No. 7220, allows fast, clean and safe filling of DEF (Diesel Exhaust Fluid), according to the company. The funnel body features a ...
The CTA 69-pc Euro/Metric Socket Set features a range of 3/8" drive Torx sockets for servicing European vehicles. The set includes 14 six-point deep metric sockets ranging in ...
The CTA Manufacturing 10-pc Oil Filling System with Universal Funnel, No. 7480, allows for fast oil filling without spillage or waste, according to the company. This tool can ...
The CTA Manufacturing 5-pc Mortorq Super Socket Set, No. 8140, offers five bits with an asymmetrical geometry that provides enhanced installation of Mortorq Super fasteners. The...
The CTA 9-Pc Oil Filling System, No. 7470, allows for fast and spill-free oil filling on a wide range of Asian, European and domestic makes and models. As many new oil cap and...
The CTA Mfg. Coolant Filling Kit with Universal Adapter, No. 7088, refills and tops off coolant systems quickly and easily during the coolant system bleeding process. The tool...
