176898522 | Denys Yelmanov | Dreamstime
Dreamstime L 176898522 6387fdfc240e2 638e14978b1ac

As emissions requirements sunset, California wants zero-emissions drayage by 2035

Dec. 5, 2022
California drayage trucks will have more stringent emissions requirements starting in 2023, and regulators are considering tightening those even further. To address charging needs, the Golden State is investing billions in infrastructure.

In addition to requiring cleaner-burning diesel engines next year, California Air Resources Board has proposed tighter environmental regulations for the state’s drayage operators that would require all port truck drivers to drive zero-emissions vehicles by 2035. Drayage trucks would be required to start transitioning to zero-emission technology beginning in 2024.

In 2007, CARB adopted drayage truck regulations to manage emissions at ports, but those rules will sunset Dec. 31, 2022. On Jan. 1, 2023, regulations will require all trucks have a 2010 model year engine or newer, or an engine with equivalent or better emissions control.

CARB is developing its Advanced Clean Fleets (ACF) proposal, which would update current regulations to accelerate decarbonization further. Hastening the adoption of zero-emission vehicles helps the organization meet the requirements of Governor Gavin Newsom’s September 2020 executive order that mandates drayage trucks reach zero-emission by 2035. Other medium- and heavy-duty vehicles in California are required to be zero-emissions by 2045 “for all operations where feasible,” according to the executive order.

See also: Volvo LIGHTS project wraps in Southern California

Among the proposed rules are registration requirements in diesel drayage trucks would have to register in the CARB Online System by Dec. 31, 2023. Starting in 2024, any drayage truck intended to be used at a seaport or intermodal railyard would be required to be zero-emissions. Active registered diesel trucks would be removed from the system once they reached 800,000 miles or their engines were 18 years or older.

California investing billions amid electric truck charging concerns

Building enough charging stations is an obstacle for ZEVs, but even if there were enough charge sites, there is skepticism as to whether the electrical grid could support them. The electricity needs for a commercial vehicle charging station would be about the same as those for a small town. Concerns rose in September when heatwaves threatened California’s grid.

“Nobody is saying we don’t want to move to advanced technology,” said Matt Schrap, chief executive of the Harbor Trucking Association, an advocacy group representing California port truckers. Truckers can’t meet the deadline due to the lack of charging infrastructure, he told the Washington Post.

Tony Brasil, chief of CARB’s transportation and clean technology branch, told the Washington Post that requiring truckers to switch to ZEVs would give companies the confidence to invest in charging stations.

See also: Industry solutions for AB5 compliance remain murky

CARB and other Californian government groups have recently allocated more funding to emissions reduction in order to meet the requirements outlined in Governor Newsom’s executive order. On Nov. 17, CARB approved its $2.6 billion Fiscal Year 2022-23 Funding Plan for Clean Transportation Incentives. Approximately $1.7 billion will be allocated to the Hybrid and Zero-Emission Truck and Bus Voucher Incentive Project (HVIP) to subsidize and incentivize ZEV adoption.

The California Energy Commission, on Nov. 15, approved an additional $1.4 billion to put toward the state’s emissions goals. This includes $690 million for medium- and heavy-duty ZEV infrastructure, expected to power 1,150 drayage trucks, 1,000 transit buses, and 1,000 school buses.

The California Public Utilities Commission adopted a five-year, $1 billion electrification program on Nov. 17. Seventy percent of the funds will go toward medium- and heavy-duty ZEV charging.

About the Author

Scott Keith

Scott Keith is an associate editor at FleetOwner.

Sponsored Recommendations

10 Steps Every Tech Should Follow Before Clearing Fault Codes

Are you tired of recurring fault codes? Clear them with confidence today! View the 10 steps that every technician should follow before attempting to clear faults.

Repair, Replace or Retire - Grab Your Calculator

Don't make the mistake of ignoring fleet maintenance. Learn how to be proactive instead of reactive and reduce up to 70% of breakdowns.

Mobil Delvac™ oils give race car haulers winning edge

See how Mobil Delvac™ oils boosted the Tony Stewart Racing Team

The Technician’s Guide for Mastering DPF Regens

Become a regen expert today! Equip yourself with the skills necessary to recognize when a forced regen is the correct procedure to maximize the lifespan of your filter and keep...