Being able to diagnose and properly repair issues with increasingly complex electrical systems requires a lot more than just the right tool for the job.
The Cal-Van Ford EcoBoost Long Reach Balancer Installer, No. 38710, is designed to install harmonic balancers of Ford EcoBoost and various other Ford/Lincoln engines from 2011...
The Cal-Van Tools Heavy Duty Tie Rod Wrench, No. 947, is designed for large inner tie rod tubes, ranging between 25mm to 55mm. It can be used on different styles of inner tie ...
The Cal-Van Tools Heavy Duty Yoke Puller, No. 497, is designed to fit multiple sizes of Spicer and Meritor full-round and half-round yokes. It can also be used on differentials...
The Cal-Van Tools 5-pc Trim and Panel Clip Tool Set, No. 113, is ideal for removing plastic fasteners, plastic clips, upholstery, and door panels. The set comes with five different...
The Cal-Van Tools C-Frame Socket Press, No. 201, utilizes a 2.5-ton capacity C-frame, included adapters, and the technician's sockets to create an ideal tool for removal and installatio...
The Cal-Van Quick-Change, Front Hub Removal Tool for Dodge and Ford 3/4 and 1-Ton Trucks, No. 90700, is designed to utilize force provided by the vehicle’s power steering to effortlessl...
The Cal-Van Tools 4-pc Oil Pan Plug Remover, No. 38200, contains tools and adapters to remove plastic oil pan drain plugs found on many late model Ford, Volkswagen, Audi, and ...
The Cal-Van Tools Serpentine Belt Tool, No. 738, is designed to make serpentine belt installations easier. This belt tool is designed to allow access to tensioners to relieve ...
The Cal-Van Tools Subaru Belt Tool, No. 737, is designed to make installing drive belts on Subaru vehicles easier. The tool includes everything needed to easily install the new...
The Cal-Van Tools Stretch Belt Installation Tool, No. 736, is designed to make installing new stretch belts easier and faster. The design helps increase the ease of installation...
The Cal-Van Tools Euro Stretch Belt Installation Tool, No. 735, is designed to make installing stretch belts quicker and easier. With multiple large adjustable pins, this tool...
The Cal-Van Tools A/C Belt Installation Tool, No. 732, helps users properly install stretch belts on newer model vehicles without causing damage to other components, the company...
The Cal-Van Tools O2 Sensor Thread Chaser, No. 841-11, can be utilized with a 3/8" drive tool or a 13/16" 6 point socket to restore and/or clean the threads of a M20 O2 sensor...
The Cal-Van Tools 4-pc Plastic Oil Pan Drain Plug Tool Set, No. 38200, contains tools and bits to remove plastic oil pan drain plugs that are found on many late model Ford, Volkswagen...
The Cal-Van Tools Mirror Tube Bender, No. 75902, is designed to allow users to precisely match the proper angle and point on run to make bends. This tool is for steel, copper ...
The Cal-Van Tools Toyota Front Hub Nut Socket, No. 977, is designed for easy removal and installation on front hub lock nuts without damage to the nut. The tool is designed to...
The Cal-Van Tools Versa Drive 2 in 1 adapters work with cordless or electric drills to allow the user to switch between bits and sockets without the hassle of changing adapters...
The Cal-Van Tools Universal Hose Clamp Pliers, No. 59, has a "waffle" iron styled design which allows the plier to grab and compress almost any clamp from any angle. The tool ...
The Cal-Van Tools 12 and 6 Point Flexible Oxygen Sensor Wrench, No. 844, is designed for use with most oxygen sensors. This tool has a double-sided design that allows technicians...
The Cal-Van Tools 1/2" Extendable Breaker Bar, No. 480, extends from 15” to 25” and is backed by a lifetime warranty. In independent lab testing, torque forces measured 6,800 ...
The Cal-Van Tools Double Tube Deburr Tool, No. 169, is designed to work on both I.D. and O.D. of cut lines to remove burrs when performing secondary operations to tubes. This ...
The Cal-Van Tools Dodge Wheel and Hub Removal Adapter, No. 90300, is designed to remove the front hubs found on 3/4-ton (2500 series) and 1-ton (3500 series) Dodge pickup trucks...
The Cal-Van Tools Ball Joint Super Set, No. 197, is designed for the removal and installation of press-fit ball joints on various makes and models of trucks, cars, vans and SUVs...
The Constant Pressure Tube Cutter from Cal-Van Tools uses a spring to keep consistent compression on the cutting blade to the tube. This constant pressure is designed to allow...
The Cal-Van Tools Quick Change Wheel Stud Cleaner, No. 16, kit features a 1/2" D adapter and six brushes. Brush sizes include 12mm, 13mm, 14mm, 16mm and 24mm. Brushes are designed...
The Cal-Van Tools 12-point Metric Axle Nut Socket Set, No. 976, features eight heavy duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota...
The Stripped Hex Screw Sets by Cal-Van Tools are available in metric (No. 439) and SAE (No. 440) sizes. These 9-pc sets are designed for removing rounded or stripped fasteners...
The Cal-Van Tools Adjustable Bearing Seal Driver, No. 506, eliminates the need for a driver and different size adapters. The durable, aluminum constructed tool comes equipped ...
The Cal-Van Adjustable Puller, No. 957, offers a low profile design that can reach into tight places. The jaws stay put before tension is applied. The puller has three jaws, a...
The Cal-Van Tools Wheel Bearing Tool, No. 904, is for use on front wheel drive cars and light trucks. The wheel bearing adapters allow the user to replace the wheel bearings with...
The Cal-Van Tools Universal Caliper Turn and Push-Back Tool, No. 727, features two pivoting pins on a detachable head that allows the unit to engage almost any different caliper...
The Cal-Van Heavy Duty U-Joint Puller, No. 199, is a heavy duty solution for disassembling seized, stubborn U-joints quickly on most Class 7 and 8 trucks and machinery. Engineered...
The Cal-Van Tools Hydraulic in-Line Flaring Tool, No. 166, was developed because technicians needed to be able to apply more forming pressure with less effort. The tool combines...
The Cal-Van Tools 2- and 3-Pin Adjustable Brake Piston Tool, No. 723, designed to rotate brake pistons back into the caliper on most domestic and import vehicles with self-adjusting...
The Cal-Van Tools Amp Hound 2, an amp meter for fused circuits, offers real-time readings of current and amps in a fused circuit without removing the fuse. By touching the probes...
The Cal-Van Tools Ford and Mazda Camshaft Alignment Kit is designed for servicing the timing belt, chains, head gaskets or other valve train repairs on Ford, Mercury and Mazda...
The Cal-Van Tools Drain Plug Repair Kit, No. 38400, is designed to repair aluminum oil pans with damaged drain plug threads size M12 by 1.75 commonly found in GM, Ford and Mazda...
The Cal-Van Tools Oxygen Sensor Wrench, No. 843, features a flex head that offers essential clearance for removal and installation of oxygen sensors when positioned upward and...
The Cal-Van Tools Master Harmonic Balancer and Pulley Installer, No. 38500, is a comprehensive set that works as a traditional harmonic balancer installer and also works on long...
The Cal-Van Tools Boost portable power source, No. 550, offers 300 cold-cranking amps, a 12V emergency start, LED flashlight, USB port for device use and charging, a durable carrying...
The Cal-Van Tools ChargeSmart, No. 543, is designed to safely charge and maintain 6V and 12V conventional, maintenance-free and 12V AGM batteries. The 100-percent true recharge...
Cal-Van Tools' Quick Ripple Tester, No. 73, can easily and efficiently test alternators for a variety of issues, including excessive ripple, through the DC Cord outlet in the ...
Use the Cal-Van Tools Long Reach Harmonic Balancer Installer, No. 38700, for the installation of underdrive or oversized pulleys, and applications with recessed threads on the...
Cal-Van' Master Inline Flaring Set, No. 165, contains in-line flaring tools with a unique design that locks the adapters, cone and tube in a perfect line making factory flares...
Cal-Van Tools' GM Thermostat Wrench, No. 751, can work on GM 3.1 and 3.4L V6 engines. Thermostat replacement forces the technician to remove the thermostat housing. In these application...
The Cal-Van Tools Constant Pressure Tube Cutter, No. 157, utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through...
Cal-Van Tools' Automotive Bubble Flare Kit, No. 155, makes bubble flares on 4.75mm soft steel or copper tubing. This in-line flaring tool can do factory flares with ease and can...
The Cal-Van Tools Recessed Body Clip Pliers, No. 56, are designed with the ability to remove push pins and body clips from bumpers and other areas of the vehicle that are recessed...
The Cal-Van Relay Circuit Pro, No. 76, allows users to test all circuits associated with a given relay. The unit tests from the battery to the relay, relay to ignition or switch...
The Cal-Van Tools In-Line Dowel Pin Puller Kit helps safely remove dowel pins without the use of a slide hammer. Users simply fit the appropriate sized collet over the dowel, ...
The Cal-Van Tools' 2-In-1 S-Cam Brake Tool offers technicians a more efficient method for changing brake shoes on an S-cam drum brake assembly. The tool is comprised of a steel...
The Cal-Van Tools Three-Valve Ford Triton Insert Kit, No. 39300, is designed to aid in the repair of, three-valve 5.4L and 6.8L engines built before October 9, 2007 and three-...
The Cal-Van Tools Hub Tool, No. 90100, is designed for removing the hub assembly from Ford 4-Wheel Drive Pickup Trucks when replacing ball joints, without causing damage to the...
The In-Line Flaring Tool from Cal-Van Tools allows users to flare copper or soft steel tubing in tight spaces with its low profile design, for use on or off the vehicle. Designed...
The Cal-Van Tools Heater Hose Disconnect Tools, No. 244TNZ, are designed to completely fill the void in the connector to release the fastener. There is also a 40-degree offset...
The Cal-Van Tools' 230TNZ Fuel Line service tools were designed to remove stubborn fuel lines. To use, force the tapered end into the disconnect, instantly disconnecting from ...
The 75 Relay Circuit Tester from Cal-Van Tools can test an entire circuit from the battery to the component in question. This tool gives technicians the ability to instantly determine...
Cal-Van Tools' multi-purpose Speed Stick Set, No. 881SET, can be used for motorcycles, racing, home use, and more. The set includes 3/8" speed stick, 1/4" speed stick (both 12...
The Cal-Van Serpentine Belt Tool, No. 734, allows the technician to grab hold of the belt and place it into the position needed. The ability to hold on to the belt makes the technician...
Cal Van Tools' Rear Bearing Puller, No. 91800, quickly and easily removes rear bearing wheel axles; no more banging with a slide hammer to remover these difficult bearings. Use...
Cal Van Tools's Tie-rod End Tool, No. 946, is compact for an easier fit in the toolbox and smoothly, easily turns aftermarket tie rods. Simply slide the tool over the end and ...
