Terry Elm 5463c4a7eb1ae 5488b7f74f274

Misfit misfire

Dec. 10, 2014
During any misfire event, it does not matter what make, model or year vehicle you drive, the first step is to determine if it is a mechanical fault.

I have talked about one of many areas of the modern automobile I am very passionate about: the reprogramming of vehicle computers or modules. I have also discussed some of the possible causes of an illuminated check engine light.

Today, I will talk about the other side of computer programming... a fault of a mechanical kind.

When your vehicle comes limping into a shop and the check engine light is on, you are no doubt worried of what may be the cause of the problem.

Of the many vehicles I test and diagnose during the week, one vehicle usually crosses my path with this type of problem. Once the basic stuff is completed and ruled out, like a visual inspection, technical service bulletin updates and battery voltage checks, the fun begins.

I hook up an enhanced scan tool to extract the codes and other pertinent freeze frame data, which is a recording of engine and transmission data information as to when the check engine light came on.

Please keep in mind that there are literary hundreds of diagnostic trouble codes (DTCs) that could pop up for any number of reasons. This is just one example: 

The vehicle was 2003 Buick Century with a 3.1L engine. The customer complained of rough running condition, misfires and (of course) a check engine with a DTC P0303 code. This indicates the powertrain control module sees a misfire of some sort on Cylinder No. 3. I decided to do a relative compression test using a Snap-On MODIS automotive lab scope. A relative compression test is an electrical current load test and is another way to test for engine mechanical compression. Why this test and not a regulator mechanical test? For me, it’s a much quicker way to determine the integrity of the engine condition. It was determined that there was a mechanical problem, rather than an injector, ignition or wiring problem of No. 3 cylinder misfire. Once the customer was informed and agreed to go ahead and remove the valve cover to check the valve train for any broken, damaged or missing pieces, I found the No.3 intake rocker arm mounting stud had stripped the threads out of the aluminum head. This was not allowing the intake valve to open and close, causing the misfire and rough running condition.

During any misfire event, it does not matter what make, model or year vehicle you drive, the first step is to determine if it is a mechanical fault. If that's not verified first, then it could be long and costly day for you. 

Always confirm the problem.

Sponsored Recommendations

Ask the Experts: Boost Profitability by Capturing Body Repair Materials Billables

Quality body repairs on medium- and heavy-duty trucks depend on the use of specialized adhesives, sealers, and other allied materials. Unfortunately, many shops face challenges...

Fleet Maintenance E-Book

Streamline your fleet's maintenance and improve operations with the Guide for Managing Maintenance. Learn proven strategies to reduce downtime, optimize in-house and third-party...

Celebrating Your Drivers Can Prove to be Rewarding For Your Business

Learn how to jumpstart your driver retention efforts by celebrating your drivers with a thoughtful, uniform-led benefits program by Red Kap®. Uniforms that offer greater comfort...

Guide To Boosting Technician Efficiency

Learn about the bottom line and team building benefits of increasing the efficiency of your technicians in your repair shop.