Heavy Duty Manual Interchangeable Master Puller Set, No. CJ2500

Snap-on releases Heavy and Light Duty Manual Interchangeable Master Puller Sets

Nov. 23, 2020
Snap-on designed the sets so that technicians can remove vehicle parts quicker and with less effort using the CJ2500 and CJ2400.

Snap-on introduced the Heavy Duty Manual Interchangeable Master Puller Set, No. CJ2500, and Light Duty Manual Interchangeable Master Puller Set, No. CJ2400. Snap-on designed the sets so that technicians can remove vehicle parts quicker and with less effort using the CJ2500 and CJ2400.

Heavy Duty Manual Interchangeable Master Puller Set, No. CJ2500

With a 6–12.5-ton capacity, the CJ2500 provides technicians next level access and power for a wide variety of pulling applications, such as removal of gears, sprockets, pulleys, bearings, bushings, sleeves, and more. The nearly identical components create 48 different puller configurations while the easy-to-use, spring-loaded locking mechanism reduces the chances of the puller slipping off of the work surface as its jaws easily latch on for both “inside” and “outside” pulling applications. The reversible jaw design and two-position yokes accommodate multiple jaw lengths up to 15” while the spring-loaded mechanism allows for quick changeover without disassembly of the puller or need of nuts and bolts. This makes for a faster set-up requiring fewer man-hours. The long-lasting, tough, one-piece jaw construction of the CJ2500 does not use pins or bolts, providing a tougher, safer jaw with six jaw sets. Its heat-treated forged jaws, yokes, and power pressure screws provide maximum strength and endurance.

Light Duty Manual Interchangeable Master Puller Set, No. CJ2400

With a 2.5-ton capacity, the CJ2400 provides technicians access and power for a wide variety of pulling applications such as removal of gears, sprockets, pulleys, bearings, bushings, sleeves, seals, bronze, Oilite bushings and pressed-in studs, and more. The exchangeable components create 36 different puller configurations while the easy-to-use, spring-loaded locking mechanism reduces the puller slipping off of the work surface as its jaws easily latch on for both “inside” and “outside” pulling applications. The reversible jaw design and two-position yokes accommodate multiple jaw lengths up to 3.5” while the spring-loaded mechanism allows speedy changeover without disassembling the puller and without the need of nuts and bolts. The long-lasting, tough, one-piece jaw construction of the CJ2400 does not use pins or bolts, providing a stronger, safer jaw with six jaw sets. Heat-treated forged jaws, yokes, and power pressure screws make this set an investment that will last.

Both Master Puller Sets work with other CJ Pullers in the product line and are made in the U.S.