Tech Tip: Troubleshooting a two-post lift – Part 2

Potential causes and solutions for a lift that lowers more slowly than normal.
Nov. 16, 2020
3 Lifts 5fb2e25151f78 5fb5494128fa5

When the work is done and it’s time to get the car back to the customer, the last thing you need is an unusually slow lift. Here are some potential causes and solutions for a lift that lowers more slowly than normal.

Possible cause: Release valve clogged

Potential solutions:

  • Check the hydraulic fluid level and cleanliness. If it's contaminated and you're using automatic transmission fluid, replace and clean the entire system.
  • Clean release valve in solvent and blow out with air.
  • Replace with new OEM part.

Possible cause: Pressure fitting is too long

Potential solutions:

  • Replace fitting with a short thread lead.

Possible cause: Cylinders are binding

Potential solutions:

  • Contact customer support.

If a vehicle becomes stranded in the air after all mechanical locks have been released and you’ve followed all standard operating procedures, immediately stop using the lift, check to make sure all locking positions are secure, and contact the factory or factory-approved service center.

For more troubleshooting solutions, check out part one here.

Information provided by Bendpak.

Sign up for FleetMaintenance eNewsletters
351251383 © Andrii Yalanskyi | Dreamstime.com
dreamstime_xl_351251383
Nuclear verdicts are meant to force faceless corporations into seeing the error of their ways. But justice is blind, so help yourself out by recording your own evidence.
Bendix
bendix_isense_pro
While air disc brakes have many benefits to offer to fleets, maintenance departments must take care to select the best pads for their vehicles and to inspect them often.
Clean Z's Mobile Detailing
Cab detailing should at minimum be done every three months.
Your drivers work—and often live—for long periods in the cab. Messes are bound to happen, but routine housekeeping and regular detailing go a long way in maintaining your drivers...