The votes are in and the results have been announced! Beginning on page 24, the PTEN Innovation Awards recognize the most innovative products introduced in the last year to the...
The Lock Technology Shockit Socket O2 Sensor Removal Kit, No. LT994, is designed to work where ratchets, wrenches, and sockets don't fit. Use air hammer power to access, loosen...
The Lock Technology 2-pc Skinny Rod Lock Out Kit, No. LT-128, features a U-shaped patent-pending serrated edge tip that effortlessly grabs and lifts the lift buttons or can be...
The Lock Technology SAE Thread Chaser Socket Kit, No. LT999, is designed to recondition threads on SAE high pressure male/female fittings. The hollow end tap slides over flared...
The Lock Technology Texas Twister Dedicated Single Rod Universal Seal/Bearing Puller, No. LT856, features a 27", one-piece design for maximum strength and power. It is made from...
Convert an air hammer into a pneumatic slide hammer with the Texas Twister Air Hammer Pulling Kit, No. LT855A, from Lock Technology. Simply snap the Texas Twister curved air bit...
The Lock Technology Texas Twister Bidirectional Air Hammer Starter Kit, No. LT855-AH-SK, allows technicians to convert their air hammer into a pneumatic slide hammer by installing...
The Lock Technology LT855-AH-SK Texas Twister Air Hammer can be used as a hammer or a puller. It is a double-duty air hammer. The LT855-AH can be used with the LT855A Texas Twister...
The Lock Technology German Vehicle Brake Caliper Socket and Bit Set, No. LT4995, works on all German vehicle brake caliper applications including Audi, BMW, Volkswagen, Mercedes...
The LTI Tools German Vehicle Rotating Ring Lug Nut Removal Kit, No. LT4569, is designed to easily remove the rotating ring lug nut locks on Audi, BMW, Mercedes Benz, Porsche and...
The Lock Technology Texas Twister, No. LT855, allows technicians to convert their air hammer into a pneumatic slide hammer. Its curved air bit snaps into the collet of the air...
The Lock Technology Lug Ripper II removes seized or frozen lug nuts off of the rim of a vehicle in 11 minutes or less, without damaging the tire rim of a vehicle, according to...
The Lock Technology Brake Re-threading Kit, No. LT993, offers male/female combo sockets with a compact design. The kit allows the user to re-thread damaged ABS control module ...
The Lock Technology VW/Audi Wheel Lock Bolt Kits, Nos. LT4150 and LT4155, are an alternative to factory-produced kits, utilizing the same factory part numbers to replace the originals...
The Lock Technology Universal Hub Shocker, No. LT830A, safely removes all frozen wheel bearing hub assemblies. The universal fit mounts to all axle bolted hubs, including five...
The Lock Technology Roller Rod Paintless Dent Removal Kit, No. LT825D, is the second generation of LTI's paintless dent removal (PDR) kit, which can be used on both aluminum and...
The Lock Technology Wheel Weight Hammer, No. LT845, is the only hammer with a second spring-loaded hammer inside the hammer's handle, according to the company. This allows technicians...
The Lock Technology Truck Brake Spring Tool, No. LT890, can be operated safely with one hand. The device connects to rear drum brake return springs. The slotted ends on the tool...
The Lock Technology Universal Hub Shocker, No. LT830, removes frozen hubs instantly by striking the 2” square metal tube with a heavy hammer. The Hub Shocker is a universal fit...
The Lock Technology LT598 ShockIt Socket Set includes very low-profile sockets to fit over frozen nuts and bolts. The sockets have a raised flat edge. Included is a custom offset...
Wedges today, especially plastic ones, have a tendency to slide out during use. The Lock Technology LT276 Self Locking Door Wedge has a wash board/wave ripple surface to it. This...
Frequently techs experience great difficulty removing frozen studs and bolts during strut, break hub, front end, exhaust, spring and suspension repair.The Lock Technology LT1800...
Lock Technology's LT465 12mm and 14mm Wheel Hanger Guides slide into wheel lugnut holes without using threads saving the technician time, because they involve no turning the wheel...
Lock Technology's LT991 Hollow End Line Taps help rethread female fittings without line removal in order to make it easier to service A/C and hydraulic line fitting threads that...
The LT-800 Inflatable Dent Remover, from Lock Technology, uses hand pumped air pressure to push dents out from the inside of door and fender panels. Available in two sizes: The...
The LT-250 eliminates water buckets and hoses when wet sanding vehicles at your body shop. Utilizes 25 feet of plastic hose and has its own water regulator valve to control water...
The LT-900 will hold any cup or gravity fed spray gun without creating hols in your spray booth. The tubular design mounts to any flat steel surface with 160 lbs. magnetic force...
Lock Technology's "Painter's Helper" eliminates spraying small parts by hanging them on hooks from the ceiling or mounting them on milk crates, resulting in poor spray angles,...
The Lock Technology Auto Groundskeeper, No. LT-525, provides a good ground for test light and multimeter diagnostic use. Especially useful in the auto industry where testing is...
The Universal Half-Shaft Removal Tool (UHRT), No. LT-836, has two UHRT sockets for removing inner half-shafts on front wheel drive cars. The first socket (LT-836-900) is for all...
The Magnetic Nut Holder, LT-230, has a flexible stainless steel body with pivoting magnetic head to reduce the risk of losing hard to reach nuts. Clips onto open and box end wrenches...
Convert your 3/8" and 1/4" air ratchet to an angle head drill. Kit includes both the 3/8" (LT-205) and the 1/4" (LT-210) Jacobs Chucks, chuck key (LT-215) and a cordless screwdriver...
The GM Rocker Lock Pick Set, No. LT-280, from Lock Technology consists of 12 double-ended, single-sided rocker picks. This set creates 24 combinations of picks, covering the more...
Lock Technology's Grand Master Lock Pick Set, No. LT-620, contains 35 picks. The set includes the LT-280, LT-290, LT-300, LT-310 and LT-320, as well as the LT-330-tension wrench...
Shines where other lights can't! Flexible wire holds the shape you give it. Focused high intensity bulb (only 1/4" in diameter) fits in the tight spots. Batteries not included...
The Dual Sided Twist Socket Lugnut Remover is for the removal of late model OEM and after market 3/4" and 19mm, 13/16", and 21mm lugnuts that are damaged/rounded because of unsuccessful...
The 12 fluted twist socket easily removes 7/8" and 1" damaged OEM and locking aftermarket lugnuts. Works with a 1/2" impact gun or breaker bar for service calls.
The 6 fluted twist socket easily removes 7/8" and 1" damaged OEM and locking aftermarket lugnuts. Works with a 1/2" impact gun or breaker bar for service calls.
The 3 piece Twist Socket Lugnut Removal System, No. LT-4300, is for the removal of damaged 3/4" and 19mm, 13/16", and 12mm lugnuts and the majority of OEM and after market locking...
Removes locked or damaged lugnuts without a key. Now 4 sizes for maximum coverage. Lugnuts are usually reusable. Use with 1/2" drive impact gun or breaker bar. Comes mounted on...
This kit easily removed damaged nuts, studs, pipe nipples and bolts. Comes mounted on a 1/2" rail, individually packaged.LT-4400-30 19mm, 3/4"LT-4400-35 13/16"LT-4400-40 7/8"LT...
This system easily removes the most commonly used damaged transmission pan bolts. Comes mounted on a 3/8" rail, individually packaged.LT-4510 10mmLT-4621 1/2"LT-4851 8mm
This system easily removes the most commonly used damaged oil drain plugs. Comes mounted on a 3/8" rail, individually packaged.LT-4513 13mmLT-4515 15mmLT-4516 16mm, 5/8"LT-4517...
This kit easily removes damaged nuts, studs, pipe nipples and bolts. Comes mounted on a 3/8" rail, individually packaged.LT-4510 10mmLT-4511 11mm, 7/16"LT-4512 12mmLT-4513 13mmLT...
This kit easily removes damaged nuts, studs, pipe nipples and bolts. Available mounted on a 3/8" rail or a custom molded case.LT-4510 10mmLT-4511 11mm, 7/16"LT-4512 12mmLT-4513...
These heavy duty truck extensions are designed to work with a 3/4" or 1" drive impact gun and lugnut sockets on large truck wheel nuts.3/4" Drive Truck Extensions:LT-1600O - 175...
The LT-1490 is a 9 piece 1/2" Drive Torque Extension and Thin Wall Socket Set. These tools are Designed for use with a 1/2" drive impact wrench and come in a custom molded carrying...
The 5 piece extension kit does the work of 13 regular torque sockets. The 5 piece kit includes extensions C, E, F, I and Q, a color wall chart and is available with a custom case...
The 4 piece extension kit does the work of 9 torque sockets. The 4 piece kit includes extensions C, E, F, and I, a color wall chart and is available with custom case or a rack...
The LT-1595 is a 12 piece Wheel Torque Master Kit. This is our most complete kit available today. These tools are designed for use with a 1/2" drive impact wrench and come in ...
Lock Technology offers their 9-pc. Wheel Torque Master Kits, Nos. LT-1590 and LT-1593. These tools are designed for use with a 1/2" drive impact wrench. These kits come with a...
The LT-1560 is a 4 piece SUV, Light Truck and Van Wheel Torque Master Kit. Sockets are deep well forged to accommodate light trucks, SUVs and vans. These tools are designed for...
The LT-1550 is a 4 piece Domestic Wheel Torque Master Kit. These tools are designed for use with a 1/2" drive impact wrench and come in a custom molded case with a color wall ...
The LT-1510 is a 10 piece Wheel Torque Master Kit. These tools are designed for use with a 1/2" drive impact wrench and come in a custom molded case with a color wall chart. (...
The LT-1500 is an 8 piece Wheel Torque Master Kit. These tools are designed for use with a 1/2" drive impact wrench and come in a custom molded case with a color wall chart. (...
The LT-760 quickly and safely presses all 3 sizes of brake shoe adjuster lever posts into the brake shoes (using an air hammer). The narrow tapered end of the tool will easily...
The Lock Technology Tire Valve Stem Cap and Core Removal Tool, No. LT-950, easily removes and replaces tire valve stem caps and valve stem cores for all tire and wheel applications...
The LT-750 secures the rotor to prevent it from being knocked around and allowing rust and dirt to fall between the hub and rotor. Each 3 inch jaw is specially designed to firmly...
Lock Technology's Deluxe Hubcap and Wheel Lock Removal Kit, No. LT-4000, replaces GM, Ford and Chrysler wire wheel hubcap locks on 1978-'97 vehicles. Also removes factory and ...
The E-Z Loader, from Lock Technology, is a magazine-loading impact socket for multiple lugnut removal. The E-Z Loader removes up to five lugnuts quickly and allows the tech to...
The LT-880 is a must have tool for 3/4 ton and heavier trucks. The rotating pivot point adjustable head allows the mechanic to clear obstacles around hub assemblies in rear brake...
The LT-825 allows the mechanic to tap out all bearing hub rotor assemblies in all Hondas and Acuras while keeping the wheel bearing's seal intact and preventing any damage or ...
The Universal Brake Piston Press, No. LT-770, is for pressing in dual brake pistons and single break pistons. Universal application for most cars, light and heavy trucks. Single...
Lock Technology's Lugnut Removal Flip Sockets, Nos. LT-4875, LT-4875A, LT-4876 and LT-4876A, ease the removal of lugnuts. The thin-wall flip sockets allow for removal of lugnuts...
Lock Technology's Five-piece 1/2"-drive Dual-sided Socket Lugnut Removal Kit with Punch, No. LT-1230, is for damaged and distorted lugnuts with steel caps. Includes: Chrysler/...
The LT960 has two 4' hoses with lock-on air chucks. The pre-settable regulator/gauge allows the user to "set it and forget it." Allows the user to inflate two tires at a time ...
Lock Technologies offers the LT-1250 1/2" Drive Dual Sided Socket and Lugnut Removal Tool, with an 18.5mm/19.5mm Chrome Cap Buster. Features include:Dual flip 1/2" drive impact...
Lock Technology’s timing gear pliers, No. LT-995, aid in removal and replacement of timing gears and serpentine belt pulleys. It helps timing gear removal by preventing rotation...
Prevent Damage To The Piston The LT-865 from Lock Technologies services timing belts and chains. This tool prevents the crankshaft from shifting when servicing belts and chains...
Great Use In Tight Spaces The new LT-875 Impact Screwdriver Socket Holder from Lock Technology is ideal for use with impact hammers. The new socket holder can be used in tight...
New from Lock Technology is their LT-910 Magnetic Impact Gun Holder that the company says can be used with most impact guns and power tools. The holder uses a tubular design that...
New from Lock Technology is their LT-140 2-Piece Easy Access ' Inflate-A-Wedge Kit. Using a rigid design for improved access through the window, the 53" tool allows for opening...
Lock Technology offers their LT-930 Light Duty Tire Caddy, the Little Gorilla, which:Easily slides under any un-weighted 14" to 19" wheel.Has steel wheel roller bearings for easy...
Use And Fold Away Lock Technology has made available their LT-135 2-Piece Easy Access Kit that includes a 2-Piece Easy Access Tool which collapses for easy storage. The Tool is...
Lock Technology introduces their LT-730 Subaru Axle Pin Removal Tool for removing and installing axle roll pins. The tool features magnatized tips to prevent the roll pin from...
Lock Technology has unveiled their LT-868 Tapered Plug Stoppers for filling empty spark plug holes, preventing debris from entering the piston combustion chamber, or plugging ...
The LT-940 Gas Tank Fuel Pump Removal Tool from Lock Technology removes plastic fuel pump retaining rings and has a universal adjustable design that fits most plastic retaining...
Lock Technology offers their LT-960 Automatic Dual Tire Inflator, with two 4' hoses containing a locking straight single chuck at the end of one hose, and a dual head locking ...
Lock Technology offers their new LT-820 Paintless Dent Remover (PDR) System with:An included training DVD that makes PDR easy to master.A patented stainless steel solid rod construction...
The durable and lightweight LT-635 Rack Saddle by Lock Technologies attaches securely with U-shaped arms and can adjust to most vehicle lifts to safely hold your screwdrivers,...
Lock Technologies developed a unique line of wrenches that are designed to increase work efficiency and ease. LT-975 and LT-976 Flex-Head Line Wrenches offer the following features...
Lock Technology's seven piece 1/2" Drive Wheel Torque Extension Kit, LT-1470, can do the work of 16 regular torque sockets, according to the company. The kit is designed for use...
Lock Technology's Inflate-A-Wedge Kit allows users to safely separate the door frame from the vehicle body, or the door panel and weather stripping from the window to unlock the...
The Heavy Duty Truck Wheel Torque Master Extensions provide a fast, simple method to achieve manufacturers specified torque every time using an impact wrench. The Heavy Duty Truck...
The LT-960 has two four foot hoses with lock-on air chucks. The pre-settable regulator/gauge allows the user to "Set-It ' Forget-It." Allows the user to inflate two tires at a...
