Ken-Tool is the world's leading manufacturer of professional tire service hand tools. Headquartered in Akron, Ohio, Ken-Tool has been providing the tire industry and automotive aftermarket with quality products for over 90 years.
The Ken-Tool Mega AirBlast Bead Seater, No. 31445, features push-button technology to allow for quicker release of air, along with a digital gauge with backlight capability. Its...
The Ken-Tool Balancing Beads for Trucks are designed to balance not only the tire and wheel, but the complete axle end and all the moving components of the wheel assembly. The...
The Ken-Tool Stow & Go Heavy Duty Wrench, No. 35636, offers user convenience with a fold away design that allows the wrench to be stowed in a trunk, toolbox or behind a seat when...
The Ken-Tool HexChex Multi-Size Loose Wheel Nut Indicators offer a wide application coverage in only four SKUs to help cut inventory costs. These SKUs cover 31 lug nut sizes from...
The Ken-Tool Pilot Sleeve is a line of wheel centering sleeves for steel or aluminum commercial truck steer wheels, drive wheels and inside/outside dual wheels which use two-piece...
Ken-Tool has announced introduction of a series of sockets designed for removal and installation of axle nuts for the most common truck axle retainer nuts in today’s market.
A quick demonstration of the Ken-Tool Rust Hog removing rust and debris from the mating surface of a steel hub & brake rotor and the mating surface of an aluminum wheel.
Here is a quick demonstration explaining some of the finer points of how the Blue Cobra works. Some of the common user errors and frustrations for first-time users attempting ...
A product test and demonstration of Ken-Tool's Shark Fin Dual Wheel Separation Bag. The bag is rated to 150 psi, applies 2.5 tons of pressing force at 90 psi.
Having the right tool does make a difference. Removing and replacing lock rings on multi-piece industrial wheels presents its own set of unique problems -- these tools are specifically...
This video shows the OSHA Certification explosion testing of the Ken-Tool's tire inflation cage that is designed for large Earthmover and Agricultural tires.
Ken Tool's Strap Winder No. 39760 has a new patented design that helps make the job of winding straps on trailers go fast and easy. Its all-steel construction is durable and has...
This video shows a 21L-24 R-4 backhoe tire being mounted on a Caterpillar wheel using Ken-Tool's brass bead holding devices (No. 31710). The bead holders keep the bead from slipping...
Over time, on hub-piloted wheel assemblies, the pads on the hub can lose tolerances originally intended from the factory, allowing for an offset between the wheel and the hub ...
Traditional valve extensions are either rigid, chrome-plated brass tubes or braided stainless steel and rubber extensions. In either case, over time, a leak can occur.
The Ken-Tool Rust Hog, No. 20167, is an abrasive tool that removes surface rust and debris on studs and flat mating surfaces of wheels, wheel hubs and brake rotor hats. The Rust...
The Ken-Tool Tire Valve Installation Tool, No. 29850, assists with snap-in rubber tire valve stems for automotive, light truck and trailer wheels. The tool is made from cadmium...
The Ken-Tool Drum Air Brake Slack Adjusters fit Meritor, Haldex and Bendix air braking systems. The steel tools, available separately, offer an offset reversible ratchet design...
The Ken-Tool Line of Truck Axle Nut Sockets, made for the most common truck axle retainer nuts in today’s market, are made in the U.S.A. and cold pressed from high-quality, tool...
The Ken-Tool 5-pc MorTorq socket tool set, No. 30260, designed for use on MorTorq fasteners, offers a “spiral drive” fastener design where the driver engages into the four curved...
The Ken-Tool Shark Fin Dual Wheel Separation Bag, No. 34555, is a rubber coated, Kevlar bag that uses air pressure to create 5,000 lbs of force to separate and remove stuck dual...
The Ken-Tool 8-in-1 Wrench, available in SAE or Metric versions, delivers strength, versatility and convenience in a 7-1/2", 12 oz slim-profile tool. The wrench is fabricated ...
The Ken-Tool 17.5 Sidewinder Kit, No. 35459, contains five tools designed to allow a single technician to demount and mount 17-1/2" diameter truck tires. The 17.5 Sidewinder Demount...
The Ken-Tool Utility Tire Cage, No. 36000, is designed for tires for turf care equipment, golf carts, all-terrain vehicles and personal mobility scooters, which are too small ...
The Ken-Tool T38B Metric Valve Breaker, No. 35938, is designed to remove corroded valve stems quickly from smaller 10mm valve stem holes, which are common on heavy duty aluminum...
The Ken-Tool Automotive Wheel Weight Hammer, No. 35361, is designed to install and remove clip-on wheel weights for automotive and light duty trucks. The hammer is 11.5" (29cm...
The Ken Tool Pro Super Hub-Shark wheel bearing press allows users to replace front wheel bearings on front-wheel-drive vehicles without removing the steering knuckle from the ...
