Designed to help technicians during heavy duty clutch repair work, the Heavy-Duty Clutch Adapter, No. 1797, has universal mounting slots that fit most high- and low-lift transmission...
The kit contains a 3-jaw puller, four lengths of rods, a forcing screw with a 3/8” internal square, a 3/4” external hex, as well as an extra set of jaws for additional applications...
Compatible with OTC’s Powertrain Lift Table, the adapter mounts easily to provide safe and proper handling of differential axle assemblies during servicing.
The scissor-designed powertrain lift can handle loads including engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more.
The crankshaft and cam tools include a crankshaft seal and wear sleeve installer, an alignment tool and replacement tip, along with a cam gear alignment fixture, retaining tool...
In this video, Jeff Buckley, master technician and shop owner, provides insight on the advantages offered through the OTC Extendable Pry Bar, No. 7177.
With this acquisition, Bosch Service Solutions is increasing its mobility offerings and connecting to a partner network of over 12,000 towing companies.
The reviewer says this diagnostic tool allows him to diagnose a problem with a vehicle without having to use a computer to look up additional information.
The OTC Brake Line Bending Pliers, No. 6719BP, offer technicians an easy way to bend brake lines on vehicles in tight and hard-to-reach areas. Thanks to its design, the pliers...
The OTC Supplementary Stand, No. UH20, is designed to stabilize vehicles and prevent tipping while they are lifted on hoists. The 3" saddle, secured in a support column, is mounted...
The OTC 1,500 lb Capacity Auxiliary Stand with Foot Pedal, No. UH15FP, offers partial support for positioning Class 1 through Class 8 powertrain components and drivetrains during...
The OTC 1,500 lb Capacity Auxiliary Stand, No. UH15, is designed to provide partial support for positioning of vehicle components during their installation and removal, from Class...
The OTC Harmonic Balancer Puller Kit, No. 6669, is designed for removing the harmonic balancer in tight engine compartments without removing the radiator. The kit contains a three...
The OTC Powertrain Lift Differential Adapter Set, No. 5295-DA, is designed to facilitate the removal and installation of common differentials currently in use. Compatible with...
The OTC Engine Adapter Plates allow technicians to safely and securely remove and hold heavy duty engines using the 1750A Revolver Diesel Engine Stand from OTC. The adapter plates...
The OTC 3.5 Ton Service Jack, No. LDJ35, is durable and ideal for both large automotive service centers and one-person shops. The LDJ35 is the optimal size for full-size pickups...
The OTC 10 Ton Air/Hydraulic Service Jack, No. HDJ10P, is designed to bring the versatility of air-assist operation to high-demand shops. Featuring a sturdy welded hydraulic pump...
The OTC 1,100 lb Capacity High-Lift Dual Wheel Dolly, No. 5105B, is designed to be an effortless air-powered hydraulic lift system for a variety of applications. It has a lifting...
The OTC Hybrid Electric Safety Gloves, No. 3991-12, are designed for technicians working on high voltage vehicles. The gloves are available in small, medium, and large with leather...
The OTC Compression Gauge, No. 5872, is designed to measure compression accurately and easily within Detroit Diesel Series 60 and two-cycle Series 53, Series 71, Series 92, and...
The OTC Cylinder Liner Installer, No. 5874, is designed to install cylinder liners into the engine block. The 5874 attaches to Detroit Diesel Series 60 engines with three-cylinder...
The OTC Cylinder Liner Remover, No. 5875, expands in the cylinder to pull liners with an inner diameter of 5" to 5.75". The 5875 uses thrust bearings on the expander along with...
The OTC Poppet Disassembly Tool, No. 5879, aids in the disassembly of poppet valves with two-prong spanner style ends. The 5879 is designed for use on all Detroit Diesel engines...
The OTC Piston Ring Compressor, No. 4853, assists technicians to compress piston rings during piston installation. The 4853 is equipped with an adjustable handle that provides...
The OTC Oil Priming Adapter, No. 6492-10, allows for proper engine pre-lube to prevent dry starts following engine service. The adapter is designed for use with the OTC Engine...
The OTC Fuel System Test Gauge, No. 5868, is used to properly diagnose and repair fuel systems. The 5868 connects directly to the priming port fitting on the engine fuel module...
The OTC Fuel System Coupler Fitting, No. 5869-1, assists with fuel system priming by connecting to the fuel system through a “compu-check” quick connect fitting. The 5869-1 is...
The OTC Fuel System Priming Pump, No. 5869, allows technicians to pressurize a fuel system after service to ensure proper operation and efficient starting on all Detroit Diesel...
The OTC 2,500 lb. Air/Hydraulic Powertrain Lift, No. 1595A, features a scissor-type design to lift and handle heavy loads for technicians, reducing stress and heavy lifting on...
The OTC Injector Cup Removal/Installation Tool, No. 5877, is a two-tool set that provides technicians with removal and installation of screw-in stainless steel injector cups. ...
The OTC Fuel Injector Torque Adapter, No. 5886, is used to remove and install injector feed tubes on Detroit Diesel DD13 and DD15 engines. The unique design of the 5886 provides...
The OTC Injector Height Gauge Set, No. 5870, is designed to assist technicians with properly setting the injector body height to the injector follower for proper fuel injector...
The OTC Injector Remover, No. 5876, is a specially designed puller that allows technicians to correctly remove seated injectors from the cylinder heads of Detroit Diesel Series...
The OTC Cam Gear Retaining Tool, No. 5884, is designed to properly hold the cam gear stationary while removing/installing the cam gear retaining bolt without damage. The tool ...
The OTC Cam Gear Alignment Fixture, No. 5881, is designed to pull the cam drive gear hub and thrust plate forward for camshaft and/or thrust plate seal removal and installation...
The OTC Crankshaft Seal and Wear Sleeve Installer, No. 5887, is designed to install the front and rear crankshaft wear sleeves and seals. The tool eliminates lip flare on the ...
The OTC Powertrain Lift, No. 5295, features a sliding split tabletop design that allows for separation of the engine/transmission assembly or hybrid engine/generator module, making...
The OTC 10-Ton Air Lift, No.1590, is a versatile air-powered lift designed to assist technicians with lifting heavy machinery or vehicles with ease. The 1590 is capable of lifting...
The OTC 2,500 lb. Air/Hydraulic Powertrain Lift, No. 1595A, is designed to handle heavy loads such as engine and transmission assemblies, gas tanks, drive axle assemblies, electric...
The OTC Heavy Duty Extendable Indexing Pry Bar, No. 7177, is designed for heavy duty uses such as positioning/re-positioning engines or equipment, aligning heavy steel plates ...
The OTC Encore and Evolve Software Update 3.7 includes new coverage for domestic, Asian, and European makes including Chrsyler, Ford, GM, Jeep, Saturn, Acura, Honda, Infiniti,...
The OTC Tire Bead Seater, No. 5713, is a time-saving tool for technicians looking to properly inflate a new or used tire mounted on a wheel with a large gap between the tire bead...
The OTC Heavy Duty Drum and Rotor Puller, No. 6979, is suitable for removing frozen, rusted, or seized drums and rotors found on one-ton pickups, school buses, and larger vehicles...
The OTC Aluminum Jack Stand and Packs are constructed with durable, lightweight aircraft-grade aluminum to provide durability and longer service life. The jacks and stands meet...
The OTC TestVac Vacuum Test Kit, No. 6978, allows for fast and efficient testing and monitoring of many vacuum-operated components. The new kit helps technicians find vacuum leaks...
The OTC Universal Cooling System Pressure Test Kit, No. 6977, is designed for a faster evaluation with a universal approach by eliminating the search for the right cap adapter...
The OTC Cooling System Refilling Gun, No. 6976, incorporates deep vacuum technology to remove airlocks when refilling the cooling system, eliminating the need for system bleeding...
The OTC Vacuum/Pressure System Tester, No. 6975, is a two-way vacuum/pressure system tester that can diagnose leaks in pressure or vacuum systems immediately, according to the...
The OTC Heavy Duty Gear Puller, No. 6614, is stout enough for almost any heavy duty application and includes a pair of metric bolts for most applications. The slim design cross...
The OTC Motorcycle Bead Holding Pliers, No. 5730, offers a locking plier design that allows for handsfree use and eliminates the need to leave the tire spoon in place to hold ...
The OTC Heavy Duty Spindle Adapter, No. 5091, is designed for low-life transmission jacks. This adapter holds the spindle assembly securely in place during king pin service, eliminating...
The OTC Suspension Bushing Tool, No. 4263, is designed to remove and replace suspension bushings, with a capacity of up to 15 tons. The hydraulic cylinder and press plate assembly...
The OTC Hendrickson Front Suspension Bushing Tool, No. 4261, is designed to help remove and replace leaf spring bushings, with a capacity of 15 tons. The hydraulic cylinder and...
The OTC Hendrickson Airtek NXT Bushing Adapter Kit, No. 4255, is designed to be used in conjunction with the company's 4263 Suspension Bushing tool to remove and replace leaf ...
The OTC Front Crank Seal Installer, No. 6758, installs the front crank seal with the cover both on or off the engine. The bolt is threaded into the crankshaft and the nut is tightened...
The OTC Timing Chain Holding Tool, No. 6746, retains the timing chain position relative to the crankshaft position. The tool clamps around the timing chain pins on both the intake...
The OTC Camshaft Actuator Locking Tool, No. 6745, engages the slots in the face of the actuator and bolts to the cylinder head and cover to hold the actuator in position. This...
The OTC Tensioner Retaining Pin, No. 6744, relieves the tension on the timing chain tensioner for camshaft, actuator and timing chain service. The pin engages the tensioner arm...
The OTC Connecting Rod Guides, No. 6553, come in a set of two and are used to protect the crankshaft bearing surface from damage during piston and connecting rod removal or installation...
The Encore and Evolve diagnostic tools will have the ability to perform DTC pre- and post-scans for Domestic, European and Asian 2017 and 2018 model year vehicles and systems....
The OTC Pan Seal Cutter, No. 6788, is designed to separate oil pan seals without causing damage to the pan and sealing surfaces. The seal cutter separates oil pan seals by pressing...
The OTC Fuel Sender Lock Ring Wrench, No. 6556, is designed for removing the 4-1/2" fuel sender lock ring on 2003-2011 Cadillac CTS, SRX and STS models. The three-prong fuel sender...
The OTC 5089 Air Brake Line Release Tools are designed to separate connectors on the power steering (P/S) system and exhaust gas recirculation (EGR) coolers without damage. The...
The OTC Fuel Pump Installation Gauge, No. 6710, is designed to verify that the camshaft fuel pump lobe is at base circle position before installing the high-pressure fuel pump...
The OTC Injector Retaining Clip Replacer, No. 6708, is designed to remove and install the injector retaining clips without over-spreading to ensure proper retention of the injector...
The OTC Injector Seal Installer Adapter, No. 6707, is a 2-pc kit designed to properly size the seal and install the seals in the proper groove on the injector tip for leak-free...
The OTC Injector Rail Assembly Remover, No. 6706, is designed for the removal of the direct injection fuel rail without damage. The rail assembly must be removed as straight as...
