The SP Tools Sprinter Injector Puller Kit, No. 17600, removes injectors from the 2.7L CDI engine. The kit enables technicians to take the top of the injector off easily with the...
The SP Tools Spring Style Hose Clamp Lock Set, No. 16200, is designed to help technicians save time when removing and servicing engine hoses that are fastened with spring style...
The SP Tools Duramax Injector Cup Puller, No. 16100, is designed to remove the injector cup and sleeve without causing damage to the cup on LB7 Duramax diesel engines for models...
The SP Tools Diesel Exhaust Bung Rethread Kit, No. 16000, is designed to repair EGT sensor bungs. These re-threaders offer a specific geometry that allows them to clean the threads...
The SP Tools Cummins Common Rail Injector Puller, No. 17200, is designed to remove diesel injectors from Dodge Cummins ISBE HPCR 5.9L and 6.7L engines produced from 2003 to current...
The SP Tools Sprinter Injector Puller, No.17600, removes injectors from the 2.7 CDI engine. Due to combustion leaks, corrosion, and wear, the injectors and valve cover may get...
The SP Tools Universal Quick Change Hammer Set, No. 15400, features three different length shafts, a quick change head design, and is made from different materials that are each...
The SP Tools Duramax Fuel Pressure Release Wrench, No. 14400, features a two-piece design to remove the fuel rail pressure release valve sensor on 2011 and later Duramax LML engines...
The SP Tools Mobea Hose Clamp Lock Set, No. 16200, is designed to help technicians save time when removing and servicing engine hoses that are fastened with spring style clamps...
The SP Tools Shouldered Crow Foot Socket Set, No. 15000, incorporates a shoulder that acts as a blind stop to aid in the installation of hard-to-reach flair nuts. This tool is...
An overview of the SP Tools 11015 Extender Arm for the 11000 Mobile Hydraulic Press Tool. This arm allows technicians to access suspensions components on the vehicle while on ...
SP Tools 11100 manual bushing R&R demo video. This video shows how quick and easy bushing replacement now is with the 11100. Cut considerable time on bushing replacement by not...
This tool allows technicians to press a wide range of bushings, ball joints, and wheel bearings out on the vehicle using our specially designed 18.2 tone ram. This tool is ideally...
The SP Tools Mobile Hydraulic Press Kit, No. 11000, allows technicians to service a wide range of bushings, wheel bearings and ball joints, while on the vehicle. This complete...
Back in the mid ’80s, cars started showing up at repair shops with engine systems that were computer controlled and the technician couldn’t even adjust an idle.
Aug. 1, 2009
Request More Information From SP Tools/Schley Products Inc.
Additional content from SP Tools/Schley Products Inc.
The SP Tools Ford Power Stroke Injector Puller Kit, No. 16300, removes diesel injectors on 6.7L Power Stroke engines 2011 and newer. Over time and with many miles on the engine...
The SP Tools Breather Hose Release Tools, No. 14550, are designed for European vehicles that utilize plastic hose locks in the engine, which can easily be damaged if removed improperly...
The SP Tools Sheppard Pitman Arm Remover from Schley Products, No. 14900, is designed for servicing Sheppard steering boxes equipped in large commercial trucks. Forged from alloy...
The SP Tools Injector Puller Kit, No. 16400, is designed to remove diesel injectors from 2011 to 2016 GM vehicles equipped with the LML Duramax engine. Over time and with many...
The SP Tools Universal 3 Leg Fuel Pump Spanner Wrench, No. T1701, is designed to aid in removing and installing of the fuel pump’s retaining ring that holds the fuel pump module...
The SP Tools Harley-Davidson Clutch Adjustment Tool, No. 14500, is designed with a 7/32” hex driver that adjusts the clutch on all Harley-Davidson motorcycles from 1983 to current...
The Matco Tools VW Lug Nut Cap Remover, No. VWLNCR, allows the technician to remove the lug caps on a VW and store them neatly until the time to reinstall them. The end tip has...
The SP Tools Diesel DEF Tube Release Forks, No. 15200, are used by technicians servicing modern diesel powered Ford and Dodge trucks. Newer vehicles are equipped with diesel exhaust...
The Tech Tools Universal Broken Stud Drill Guide, No. T1702, from Schley Products, is designed to handle a broken stud during an engine service. The Exhaust Stud Drill Fixture...
The SP Tools Sensor Socket Set, No.15300-EGT, is designed to remove exhaust temperature sensors on most modern automobiles. Because of heat cycles and the corrosive environment...
The SP Tools Pneumatic U-Joint C-Clip Remover, No. 14200, was developed for Ford, GM, Dodge, Jeep, International and any other vehicle that uses a U-Joint with a C-Clip retainer...
The SP Tools Toyota Parking Brake Tool, No. 14150, was designed to enable technicians to work safer and more efficiently when servicing the brakes on 2000 model year and newer...
